Des Plaines Service Overview
- Local Priority: Home Comfort provides expert heating and cooling services, indoor air quality solutions, and water heater services in Des Plaines, IL, serving homeowners in older neighborhoods, condos, townhomes, and remodeled properties throughout Des Plaines.
- Certified Expertise: Our experienced HVAC technicians understand the common challenges in Des Plaines homes, including aging HVAC systems, outdated ductwork, uneven airflow, humidity problems, and inefficient heating and cooling performance. We specialize in diagnosing and repairing issues caused by home additions, finished basements, and long-running furnace and AC systems.
- Efficiency Focus: We deliver complete home comfort solutions in Des Plaines, including HVAC system tune-ups, furnace maintenance, AC replacement, ductwork optimization, and humidity control systems.
Des Plaines stretches from neighborhoods near Lake Opeka and Oakton Street over toward Mannheim Road, River Road, and the residential areas surrounding downtown Des Plaines, with many homes still relying on older furnaces, boilers, ductwork, and water heaters installed decades ago. Home Comfort already services homes throughout Des Plaines every week, helping homeowners solve airflow problems, uneven temperatures, humidity issues, and aging HVAC system concerns before they become major repairs.
From homes near Cumberland to condos closer to the Metra station and downtown, our technicians understand the comfort issues common throughout Des Plaines properties. If your furnace is struggling, your AC cannot cool evenly, or your water heater is showing signs of wear,, call Home Comfort at 847-824-4336 or connect with us online to schedule service in Des Plaines.
Trusted Local HVAC Contractor in Des Plaines, IL
Des Plaines has one of the wider mixes of housing styles in the northwest suburbs, from older ranch homes and brick split-levels to remodeled condos and townhomes closer to downtown. That variety creates a lot of different heating and cooling challenges depending on how the house was originally built and how many times the systems have been updated over the years.
Our technicians regularly work throughout neighborhoods near Brentwood, Lake Park, Orchard Place, and the residential streets surrounding Maine West High School where additions, enclosed porches, finished basements, and aging duct systems often create comfort problems tied to the layout of the home itself. We also service many homes near the Des Plaines River Trail and the areas surrounding Rand Road where older mechanical systems have been repaired and modified several times over the years instead of fully redesigned.
Homeowners continue calling Home Comfort because they want technicians who slow down, diagnose the actual problem, and explain what is happening clearly instead of immediately recommending full system replacement.
“David Roman was very thorough and kept me informed throughout the process of fixing our furnace. Having a warm house again is fantastic. I recommend this company and David.”
Furnace, Boiler & Heat Pump Repair in Des Plaines, IL
When winter weather hits in des plaines 60018, heating problems often trace back to the way older homes were originally designed decades before modern high-efficiency systems became standard. Homes near Prairie Lakes, the neighborhoods surrounding Iroquois Community School, and older residential sections west of River Road frequently deal with uneven heating caused by aging ductwork, enclosed porches, boiler conversions, and additions that changed how heat moves throughout the house. Heating services available through Home Comfort include:
- Heating Repair
- Heating Installation
- Heating Maintenance
- Furnaces
- Heat Pumps
- Boilers
- Commercial Heating
- Condo Heating
- Thermostats
One of the most common heating complaints we hear in Des Plaines involves homes where certain rooms stay noticeably colder than the rest of the house even though the furnace seems to run nonstop. We regularly troubleshoot homes near Chippewa Middle School, Central Elementary, and the neighborhoods surrounding Oakton Street where airflow restrictions, older blower motors, and decades of remodeling work created heating imbalances throughout the property.
“Craig was knowledgeable about what was wrong with our space heater and quickly made arrangements for the part and explained approximately when they will return to repair it. Craig knows what he is doing and is very pleasant to be around.”
AC Repair & Emergency Cooling Services in Des Plaines
When you need reliable ac repair in 60016, some of the most common summer comfort problems in Des Plaines show up in second-floor bedrooms. Our technicians provide emergency hvac service in 60016 to keep your household safe during sudden heatwaves. Our technicians regularly work in homes near Lake Opeka, the residential streets surrounding Forest Elementary, and neighborhoods east of Mannheim Road where older duct systems and remodeled floorplans leave certain parts of the house noticeably warmer than others. Home Comfort provides cooling services throughout Des Plaines including:
- AC Repair
- AC Installation
- AC Maintenance
- Heat Pumps
- Ductless AC
- Commercial Air Conditioning
- Condo Air Conditioning
- Thermostats
Many Des Plaines homeowners first realize something is wrong when second-floor bedrooms stay uncomfortable long after the rest of the house cools down or when the AC seems to run constantly during hotter stretches of weather. We see that issue frequently in homes near Orchard Place and the residential streets surrounding Algonquin Middle School where renovations and additions changed the home’s original airflow demands over time.
Des Plaines HVAC Troubleshooting & Household Solutions
Problem: Second-floor bedrooms and finished upper additions remain excessively warm and humid during summer months.
Solution: Detailed dynamic diagnostic evaluations of static pressure, duct capacity, or secondary ductless zoning to achieve complete cooling balance.
Problem: Severe room-to-room temperature imbalances and furnaces operating continuously without keeping back bedrooms comfortable.
Solution: Comprehensive inspection of older blower hardware, structural air flow blockages, and localized system modifications.
Problem: Sudden drops in hot water supply volume or aggressive popping noises stemming from the bottom of the tank.
Solution: Deep technical tank flushes to eliminate destructive sediment accumulation or reliable full-system updates.
Indoor Air Quality Upgrades & Air Duct Repair in Des Plaines
Des Plaines homeowners notice certain parts of the house never feel quite right even when the HVAC system is running normally. Homes near Lake Park, the residential streets surrounding Terrace Elementary, and older neighborhoods west of Wolf Road often deal with stale air, lingering dust, dry winter conditions, and uneven humidity caused by older return duct layouts and tightly enclosed living spaces. Home Comfort provides indoor air quality solutions including:
We regularly work in Des Plaines homes where remodeled lower levels, enclosed additions, and aging return ducts create stale airflow and uneven humidity throughout different parts of the house. Many homeowners notice the difference most during winter when dry air becomes uncomfortable or during summer when lower levels begin feeling damp and musty.
Water Heater Repair & Tankless Maintenance in Des Plaines
Water heater problems throughout Des Plaines usually begin with smaller warning signs homeowners notice during daily routines, like running out of hot water faster during busy mornings or hearing loud popping noises caused by years of sediment buildup inside the tank. We frequently work in homes near Lake Park, the residential streets surrounding Golf Road, and older neighborhoods closer to downtown Des Plaines where water heaters are beginning to struggle with heavier household demand after years of daily use. Home Comfort provides:
- Water Heater Repair
- Water Heater Installation
- Water Heater Maintenance
We often get calls from homeowners who were already told they need full replacement without much explanation about what actually failed. Our technicians take time to inspect the water heater thoroughly, explain what condition it is in, and help homeowners decide whether repair or replacement makes the most sense for their situation.
“Excellent service. They spent more time than another company’s tech who recommended replacement very quickly. I felt like I was working with a knowledgeable tech. Craig Milner was great.”
Why More Des Plaines Homeowners Continue Choosing Home Comfort
A lot of homes throughout Des Plaines have been remodeled, expanded, or updated over several decades, which often leaves heating and cooling systems working far differently than they were originally designed to. Our technicians regularly work in homes where older ductwork, newer equipment, finished basements, and previous repairs all need to function together properly to keep the home comfortable. Homeowners throughout Des Plaines continue choosing Home Comfort because we provide:
- Experienced technicians familiar with older suburban housing layouts
- Detailed diagnostics instead of rushed service calls
- Honest recommendations without pressure sales tactics
- Responsive scheduling and dependable communication
- Long-term comfort solutions tailored to the home
- Clean, respectful work inside occupied homes and condos
Many of our customers continue calling us year after year because they want technicians who explain problems clearly, focus on practical repairs, and treat their home with respect from start to finish.
Schedule HVAC or Water Heater Service in Des Plaines, IL
Homes throughout Des Plaines near Lake Opeka, the residential streets surrounding Maine West High School, and older neighborhoods closer to River Road often develop comfort problems as additions, finished basements, and remodeled upper levels slowly change the way air moves through the house. Whether your upstairs stays warmer than the rest of the house, your furnace has become unreliable during winter, or your home’s airflow feels uneven between floors, Home Comfort already has technicians working throughout Des Plaines every week who understand the layouts, equipment, and comfort issues common throughout the area.
Call Home Comfort at 847-824-4336 or connect with us online today to schedule heating, cooling, indoor air quality, or water heater service in Des Plaines, IL.
FAQs for Homeowners in Des Plaines, IL
Why is my second floor warmer than my first floor?
This is common in homes around Algonquin Middle School where historical layouts or localized home renovations alter airflow requirements, leaving standard return systems unable to adequately cycle air from finished upper floors.
What causes water heaters to make popping sounds?
Loud popping noises generally signal years of solid sediment buildup inside the bottom of the storage tank. This traps water underneath the layers, causing it to boil intensely and strain the equipment during heavy daily use.
How do additions change home heating efficiency?
When enclosed porches or extra spaces are added to older Des Plaines homes, original duct setups are often stretched thin, keeping certain back rooms cold even when a furnace operates continuously.
Page Updated on June 8, 2026
Recent Jobs and Reviews in Des Plaines, IL
Des Plaines, IL at a glance
Home Comfort Services, Inc. has completed 20 jobs in Des Plaines, IL in July 2026.
The most recent job was on July 18, 2026.
Job Locations and Reviews
Responded to no-cool call on 4-year-old central air conditioning system. Upon arrival, confirmed unit would not power on and thermostat displayed permanent hold setting at 70°F with ambient temperature reading of 76°F. Inspected outdoor condensing unit and indoor evaporator coil assembly. Found evaporator coil showing normal operational wear with some minor debris accumulation between fins and typical copper refrigerant line oxidation consistent with unit age. Verified thermostat functionality and system wiring connections. Troubleshot electrical components and restored system operation, confirming proper startup sequence and cooling cycle initiation.
Responded to service call for commercial rooftop air conditioning unit producing loud mechanical noises described as "bowling balls" inside the system. Upon arrival, conducted visual inspection of multiple rooftop condenser units and identified significant frost and ice accumulation on evaporator coil, indicating restricted airflow or low refrigerant charge. Documented equipment condition with photographs showing crystalline ice buildup along coil edges and potential airflow obstruction. System requires further diagnostic testing to determine root cause of noise complaint and address refrigerant system abnormalities affecting cooling performance.
Responded to service call for outdoor condensing unit with reported ice formation and non-spinning fan. Upon inspection, confirmed blower wheel assembly was not operating properly despite unit being approximately one year old. Performed diagnostic assessment of both indoor blower motor assembly and outdoor condenser unit, documenting equipment condition with photographic evidence showing blower wheel/squirrel cage fan configuration and exterior condenser installation on gravel pad against building exterior.
Completed spring preventive maintenance on two rooftop units per commercial care program agreement. Performed comprehensive inspections of electrical controls, contactors, and wiring systems; verified proper operation of blower assemblies, belt drive systems, and motor components. Documented equipment conditions with photos showing control panel configurations and blower compartment assemblies. Filter changes scheduled for fall maintenance cycle per agreement terms. Both units operational and meeting performance standards.
Responded to no cooling complaint on residential air conditioning system. Upon arrival, performed diagnostic evaluation of outdoor condensing unit. Verified thermostat settings, checked breaker panel, and inspected air filter. Testing revealed failed dual-run capacitor preventing compressor and condenser fan motor operation. Removed defective 440VAC 37.5+5 MFD capacitor and installed new OEM replacement unit. Restored power to system, verified proper compressor startup, and confirmed condenser fan motor operation. Tested system performance and verified adequate cooling delivery at supply registers. Unit operating within normal parameters upon departure.
Completed comprehensive air conditioning clean and check service per Platinum Plan maintenance agreement. Performed full system inspection including thermostat operation verification (Aprilaire unit displaying 79°F), condensate drain line assessment with NAPCO PVC piping and drain pan inspection, and standard preventive maintenance procedures. Noted existing wall moisture staining in utility area near drain pan location; all HVAC components functioning properly with no immediate service requirements identified.
Performed tankless water heater flush service. Isolated unit using service valves, connected submersible pump with braided flex hoses to circulation bucket, and circulated descaling solution through heat exchanger to remove mineral buildup and restore optimal performance.
Responded to service call for air conditioning system with fan running continuously. Upon inspection, found Honeywell Home ProSeries programmable thermostat set to cooling mode with fan operation issue. Diagnosed thermostat fan setting configuration causing constant fan operation. Adjusted thermostat settings from continuous fan operation to automatic mode, resolving the issue. Verified outdoor condenser unit operation and confirmed system cycling properly with fan now operating only during cooling cycles as designed.
Responded to service call for excessive condensation on 2-year-old residential air conditioning system. Upon arrival, performed visual inspection of outdoor condensing unit and indoor HVAC components including furnace and associated refrigerant lines. Evaluated insulation integrity on copper refrigerant tubing, checked for proper drainage from condensate system, and inspected all accessible ductwork and piping connections. Documented system configuration with photographs showing both indoor air handler installation with PVC condensate drain lines and outdoor condensing unit positioned on concrete pad in landscaped area. Assessed overall system operation and provided customer with findings regarding condensation concerns.
Completed full air conditioning system replacement including reclamation of existing refrigerant from old condenser, coil, and line-set. Removed and disposed of existing equipment, then installed new Lennox 2.5 ton 13 SEER2 single-stage condensing unit (Model ML13KC1-030-230) on leveled pad with pea gravel and new evaporator coil. Connected to existing copper refrigerant lines, evacuated system to remove moisture and air, and charged with R454B refrigerant. Additionally installed EPA-compliant refrigerant detection system on existing furnace per code requirements. Performed complete system start-up, operational testing, and safety inspection with temperature readings confirming proper system performance at 18.8°F supply air temperature. All equipment tested and operating within manufacturer specifications with 10-year parts warranty and extended labor agreement provided.
Responded to service call for 12-year-old residential AC unit with non-operational condenser fan motor. Upon arrival, confirmed compressor was running but outdoor fan motor failed to start, accompanied by screeching noise during startup attempt. Diagnosed failed dual run capacitor as root cause of fan motor failure. Replaced defective capacitor with OEM-spec replacement, tested system operation, and verified proper amperage draw on both compressor and fan motor circuits. Unit restored to full cooling operation with normal sound levels and airflow.
Responded to no cooling complaint on aging air conditioning system experiencing repeated evaporator coil freezing at the filter location. Upon arrival, performed diagnostic evaluation and measured system temperatures, recording 176°F at key component. Inspected refrigerant lines, evaporator coil assembly, and associated mechanical components for airflow restrictions, refrigerant charge issues, and potential system failures. Documented equipment condition with photos showing copper refrigerant piping, coil assembly, and mechanical connections. Customer had previously replaced filter and allowed unit to defrost before restart, but freezing recurred, indicating underlying airflow deficiency or low refrigerant charge requiring further evaluation and repair recommendations.
Completed full air conditioning system replacement including reclamation of existing R-22 refrigerant from old condenser, coil, and line-set, followed by proper disposal of obsolete equipment. Installed new Lennox 4-ton 13 SEER2 single-stage condensing unit (Model ML13KC1-048-230) on leveled pad with pea gravel base. Installed two new evaporator coils to accommodate twinned furnace configuration in attic space, fabricating custom sheet metal transitions to ensure proper fitment and airflow distribution between both units. Connected new coils to existing copper refrigerant lines with brass service valves and proper insulation. Added RDS (refrigerant detection system) units to both existing furnaces for safety monitoring. Evacuated entire system to remove moisture and air, then charged with new R454B refrigerant to manufacturer specifications. Performed complete system startup, testing, and adjustment of all components including electrical connections, refrigerant pressures, and airflow
Completed mini split system installation including proper electrical connections at the indoor air handler unit. Wired terminal connections per manufacturer specifications with appropriate color-coded conductors, secured ground wire to chassis, and closed up electrical compartment after verifying all connections were tight and properly terminated.
# HVAC Service Completed - No Cool Condition Responded to warranty service call for air conditioning system not cooling residence effectively. Upon arrival, verified thermostat was set to cooling mode and confirmed air handler was running but delivering insufficient cooling. Conducted systematic diagnostic evaluation of the system. Performed visual inspection of indoor unit and discovered significant water accumulation on floor near air handler, indicating drainage issue. Identified clogged condensate drain line as primary cause of system malfunction. Water backup triggered float switch safety mechanism, shutting down compressor operation to prevent overflow damage while allowing blower to continue running. Cleared obstruction from condensate drain line using appropriate tools and techniques. Verified proper drainage flow and tested float switch functionality. Inspected drain pan for cracks or damage - found pan intact. Flushed drain line thoroughly to ensure complete blockage remov
Responded to no cooling complaint on 6-year-old air conditioning system. Performed diagnostic evaluation of outdoor unit including electrical component inspection and amp draw measurements on compressor circuit. Verified proper power supply to contactor and associated wiring connections. Tested system operation and measured current draw to assess compressor performance and overall unit functionality.
Responded to service call for non-cooling air conditioning system serviced by 4-ton unit with dual furnace configuration. Performed diagnostic evaluation of HVAC system including thermostat settings, air handler operation, and electrical components. Inspected existing equipment installation in mechanical room, documented current condition of ductwork, air handler unit, condensate drainage lines, and refrigerant piping. Provided comprehensive replacement estimate for complete system upgrade based on existing dual-zone configuration and equipment access limitations in utility space.
Completed preventive maintenance clean and check on single cooling system. Verified thermostat operation with Honeywell Home unit displaying proper cooling mode functionality at 64°F ambient with setpoint of 51°F. Performed electrical diagnostics using True RMS multimeter to verify system amperage and voltage readings within manufacturer specifications.
Completed annual clean and check maintenance on one air conditioning system per comfort plan agreement. Performed comprehensive inspection of outdoor condensing unit including electrical components, contactor, capacitor, and wiring connections; inspected indoor air handler and blower assembly; all components found operating within normal parameters and system tested successfully upon completion.
Responded to no cooling complaint on American Standard Allegiance 10 system (Model 7A0048A100A0, Serial K17294CCEF). Performed standard diagnostic evaluation of outdoor condensing unit and indoor air handler, verified thermostat settings, checked system breakers, and inspected air filter condition. Documented equipment information and captured photographic records of both indoor furnace/air handler installation and outdoor condensing unit for service file.
