Whether you need to heat your Skokie home during the cold months or rely on AC to stay cool in the summer, Home Comfort Services is here to help. We provide a full range of heating, cooling, and plumbing services to keep your home running smoothly year-round.
With emergency services, you can count on us when unexpected problems arise. Home Comfort proudly serves Skokie and the surrounding areas, from protecting your plumbing during freezing temperatures to ensuring your HVAC systems are ready for the heat.
Contact Home Comfort today for reliable heating, cooling, and plumbing services in Skokie seven days a week, and keep your home comfortable year-round.

Heating Services Seven Days a Week
When the cold winters hit Skokie, keeping your home warm is essential. At Home Comfort, we offer a full range of heating services to ensure you stay cozy, including installing new systems, replacing old ones, and performing repairs and maintenance.
We work with both furnaces and boilers. Furnaces heat the air and blow it through vents, while boilers heat water and send steam or hot water through pipes to warm your home. Whether you need a new furnace or repairs on your home’s boiler, we’re here to keep everything running smoothly and ensure you stay warm all winter.
Reliable Cooling Replacement & Repair
The summer heat can be intense in Skokie. When temperatures climb, keeping your home cool is a must. Home Comfort offers all the cooling services you need to stay comfortable. This includes installing new systems, replacing old ones, and taking care of repairs and maintenance.
We work with various cooling systems, including ductless mini-splits and heat pumps. Ductless mini-splits cool specific rooms without needing ducts, while heat pumps can cool and heat your home. Whether you need a new system or repairs on your current one, we’re here to ensure everything runs smoothly and keeps you cool all summer.
Commercial HVAC Services Offered
Keep your business comfortable with our commercial HVAC services. We provide installation, maintenance, and repair for heating and cooling systems. Whether you run a restaurant, office, or retail space, we ensure your HVAC systems work efficiently for a comfortable workplace.
Top-Rated Air Quality Services
Skokie’s high humidity and allergens can affect indoor air quality, causing discomfort and health issues. Home Comfort offers top-rated indoor air quality services to keep your home’s air clean and fresh.
We handle air filters, air purifiers, and ventilation systems to address dust, mold, and pollen. We also clean and inspect your ductwork to prevent dust and debris from spreading. By improving your air quality and maintaining your ducts, we help create a healthier and more comfortable home.
Trusted Water Heater Installation & Repair
Hot water is key to your daily comfort, so we ensure your water heater is always working well. We partner with Goode for new installations and handle maintenance and repairs for both traditional and tankless water heaters. Whether you need a new unit, a replacement, or repairs, our team provides dependable service to keep your hot water flowing smoothly.
Sign Up for Our Maintenance Plan Today
Our maintenance plan helps keep your systems running smoothly. With regular checkups, you’ll benefit from lower repair costs, priority scheduling, and early detection of potential issues. Signing up ensures your equipment stays in top condition and avoids unexpected problems.
Schedule Services in Skokie, IL With Home Comfort Today
At Home Comfort, we’re proud to serve Skokie and are dedicated to our community. As Premium Customer Conveniences and the exclusive HVAC partner of the Northwestern University Wildcats, we guarantee top-quality service.
We provide upfront pricing, financing options, and discounts for military, veterans, and seniors. Plus, our background-checked technicians deliver reliable and trustworthy service with every job.
Need excellent service in Skokie? Contact Home Comfort today to schedule your appointment and experience our top-quality care.
Recent Jobs and Reviews in Skokie, IL
Skokie, IL at a glance
Home Comfort Services, Inc. has completed 20 jobs in Skokie, IL between July 2026 and November 2026.
The most recent job was on November 16, 2026.
Home Comfort Services, Inc. has completed 53 jobs in Skokie, IL in the last 12 months.
Job Locations and Reviews
Performed a Comfort Plan clean and check on one gas furnace, inspecting the inducer draft blower, gas valve and manifold, burner assembly, pressure switch, control board, and wiring harnesses. Components were found in good condition with no signs of rust, frost, or physical damage, and the system was left in proper operating order.
Replaced the gas water heater under the manufacturer parts warranty, disconnecting and removing the existing Bradford White unit and installing the replacement with gas, water, and venting connections restored. The removed tank was retained and not scrapped, and is staged for return to the supplier for warranty processing.
Performed annual Comfort Plan clean and check on the boiler, inspecting and cleaning the burner and flame sensor/ignition assembly to ensure reliable flame detection and proper ignition. Conducted combustion safety testing with a calibrated carbon monoxide analyzer, which recorded 23 PPM during operation, and verified the system was operating safely at completion.
Performed a Comfort Plan clean and check on the furnace, humidifier, and water heater, including replacement of the 20x25x4 media filter. Inspected the condensate drain line and found the 3/4" PVC drain section disconnected from the drain fitting, with cobweb-like debris on the elbow, and reconnected it to restore proper condensate drainage. Verified thermostat operation, with the display showing a 72° setpoint and 68% indoor humidity.
Performed annual clean and check on a Weil-McLain gas-fired hot water boiler and inspected the gas water heater. Visually inspected the boiler cabinet, flue piping, and stainless vent hood, and verified system temperature and pressure on the combination gauge. Checked the expansion tank and surrounding piping, and found no visible rust, leaks, or damage on the boiler, water heater, or vent connections.
Responded to a no-heat call on an older furnace following a recent thermostat replacement. Inspected the existing control wiring and combination control and found aged cloth-sheathed wiring, loose and uninsulated low-voltage conductors, and an open junction box. These conditions are consistent with improper thermostat wiring and degraded control connections. Documented the equipment and wiring conditions with photos, and recommended correcting the thermostat wiring and replacing the aging control components to restore reliable heating operation.
Performed seasonal clean and check on the furnace, humidifier, and water heater. Inspected the blower assembly, including the motor, wiring, and housing, and found all components intact with no visible damage, corrosion, or wear. Inspected the whole-house humidifier and surrounding duct and wiring, and noted minor condensation on the adjacent piping. The system is operating properly with no issues identified.
Replaced the failed inducer motor assembly on the furnace under manufacturer parts warranty, removing the defective unit and installing the new motor. Also replaced the contactor on the outdoor condensing unit, then verified proper operation of both the furnace and condenser.
Responded to a water leak complaint at the air handler and inspected the evaporator coil and condensate drain pan, finding heavy copper return bend oxidation, galvanized casing corrosion, and a drain pan holding slimy, foamy standing water indicative of microbial buildup and restricted condensate drainage. Verified coil operation by measuring a supply temperature of 49.1°F with a digital thermometer, indicating the system was cooling and not in a frozen condition. Documented findings with photos and recorded equipment information.
Completed comprehensive tune-up and maintenance on residential furnace system and humidifier. Performed standard preventive maintenance procedures including inspection of heat exchanger, burner assembly, and blower components. Verified proper system operation with temperature diagnostics, measuring supply air temperature at 156.7°F, confirming adequate heat output and efficient combustion. Conducted clean-and-check service on whole-home humidifier unit to ensure optimal performance during heating season. All components found operating within manufacturer specifications with no deficiencies noted.
Completed routine maintenance tune-up on rooftop unit (RTU) including inspection of blower housing, ventilation components, and internal mechanical assemblies. All accessible components were examined, photographed for documentation, and system confirmed operational upon completion.
Responded to no cooling complaint at commercial facility. Upon arrival, confirmed no airflow from system and excessive condensation on refrigerant lines. Diagnosed failed blower motor causing complete loss of air circulation. Removed and replaced defective squirrel cage blower assembly. Verified proper motor operation and temperature readings using calibrated test equipment, confirming system restored to normal cooling operation.
Responded to water leak in furnace room and identified source as failed condensate pump motor with visible thermal damage to housing and wiring. Documented equipment condition with thermal imaging and photographs showing heat-related component failure on GENERAL brand pump assembly. Recommended immediate pump replacement to prevent further water damage and restore proper condensate drainage from HVAC system.
Responded to service call for system leak detection. Performed diagnostic evaluation of A/C system components and removed valve screen assembly from outdoor unit for inspection. Continued troubleshooting procedures to isolate source of refrigerant leak. System currently set to 70°F with ambient temperature at 73°F. Further leak detection work required to pinpoint exact location of system failure.
Completed Gold Clean and Check service on residential air conditioning system per maintenance plan protocol. Performed comprehensive inspection of outdoor condenser unit, replaced media filter (20x25x5), and verified system performance with supply air temperature reading of 29.5°F. All components operating within normal parameters and system ready for cooling season.
Responded to warranty call for recently installed Unit #32 reporting complete AC failure. Upon inspection, performed diagnostic testing on ductwork and system components using digital thermometer to verify airflow and temperature readings. Confirmed proper installation of ductwork connections and verified system integrity, with all components functioning within normal parameters following troubleshooting procedures.
Responded to no cooling complaint for Suite 31. Upon arrival, found unit producing minimal cooling output. Inspected thermostat showing 72°F setpoint with system in cooling mode, then examined control board assembly and wiring connections. Documented system conditions including thermostat display readings and internal control board configuration for diagnostic purposes.
Diagnosed and repaired a refrigerant leak at the condenser unit by cutting out and replacing a failed 3/8" coupling. Trapped existing refrigerant into the compressor, performed vacuum test on the repaired lines to verify system integrity, and recharged the system with refrigerant weighed to manufacturer specifications.
Responded to no cooling call on air conditioning system. Upon arrival, performed visual inspection of outdoor condensing unit and refrigerant line connections. System had previously experienced refrigerant leak in May during prior service visit. Inspected refrigerant lines, fittings, and service ports for signs of refrigerant loss using leak detection equipment. Documented equipment information and photographed refrigerant line connections at outdoor unit. Discussed leak search services and repair options with customer including flat rate pricing for refrigerant leak detection and system recharge with R-454B refrigerant.
Responded to no cooling complaint on 6-9 year old system with air handler located in attic above shower area. Upon inspection, found Mosquito drain safety float switch tripped and in alarm state, indicating primary condensate drain line blockage. Observed moderately soiled 20x1 air filter requiring replacement. Cleared condensate drain obstruction, reset safety switch, and replaced air filter. System restored to normal cooling operation with proper condensate drainage confirmed.